Refill Instructions
Canon BCI-10, BCI-11 Cartridges
Also Apple M3912GA, and M3910GA Cartridges.
Canon BJC 30 and BJC 70 Series Printers
as well as Apple Stylewriter 2200 Portable Printers.
Updated May 13, 1999.
Theory
The ink in this cartridge is retained because the cartridge has an internal
sponge.
Instructions
Step 1) Put the cartridge on some paper towels in an area where you
can tolerate a spill.
Step 2) Flip over the cartridge. Locate the sponge(s) on the bottom.
Step 3) Inject the cartridge with about 2 ml of ink (about 1/16
of a syringe bottle.) Be careful -- this sponge doesn't hold much ink!
Inject S-L-O-W-L-Y to fill the entire cartridge. Be sure
to remove and re-insert the needle a few times to expose the entire sponge
to the ink.
Step 4) Set on a paper towel for an hour as a drip precaution. Expect a few
drips. Cover all holes during storage to prevent leaks and evaporation.
To Clean the Printhead
Do not clean the printhead unless you get poor print quality.
Follow the directions in the inkjet manual.
Run the printhead cleaning software.
To Clean Your Sink
The ink is water-soluble. Use plenty of soap and warm water. You may also
need to use Comet or a similar cleaner if the stains persist.
To Clean Your Hands
On hands, the best substance to use is
Ink Be GoneTM, a
specially developed hand cleaner available from Ink Refill R Us Ink Refills.
(To place an order, Click Here.)
To Place An Ink Order
You can telephone us at 1- 213-746-9915 (USA Contact in) or 1+ 213- 746 9915. You
can also Order Online
or by other ways including
by Fax, or by
Postal Mail, or by
EMAIL.
© 1999, Inc., Inc.
Contact us at 1- 213- 746 9915 or email us at
ink@rankguard.com.
Main Ink Page |
Other Refill Instructions and Help |
Home
http://ink-refill.rankguard.com/ink/help.htm