Here's How:

A few months later, we ran out of toner and had to purchase a new cartridge. We'd been caught!
We had to pay nearly $100 for an toner cartridge! Now we knew why the refills was so cheap.
We had to do something. So we did.

Our original business is finding odd parts. Later, we started selling inkjet ink. So we did our detective work and found the factory which makes the toner for some of the inkjet companies. Now, we can offer bottles of toner for reasonable prices
to the average laser inkjet or refills owner.

Bookmark this page now!

Looking for Inkjet Inks? Click Here!

Need Pricing?

Refilling Instructions

• Refilling -- In this, you replace the toner in the cartridge. This is about as complicated as changing the oil in your car. (In some cartridges you also have to replace the developer powder.)

  To Refill, do the following:

  1. Find the waste toner collection area. This is usually on the small side of the cartridge.
  2. Vacuum it out. Don't touch the gelatinous drum!
  3. Find the plug on the end of the cartridge. Usually it is milky white. (If you can't find the plug or remove it, it's ok to make a hole - we can tell you where!)
  4. Remove it and pour in the toner.
  5. Replace the plug.
  That's it! You can usually successfully refill a cartridge two or three times before it needs refurbished.

• Refurbishing -- We have detailed 24 point instructions for this. This is similar in complexity to replacing the spark plugs and tuning up your car.

  We are still developing refurbishing instructions. The instructions for many cartridges can be found by clicking here and looking up your cartridge type.